W.e.f. 1 Apr 2024 onwards, refresher training for Fire Station Emergency Medical Technicians will be enhanced and the In Camp Training period will be extended from 19 to 23 days. Please check with your Deputy Commander Fire Station or unit for more info.

W.e.f. 1 Jul 2024, SCDF will change its sender ID for NS Mobilisation matters from “91449746” to “80709995”. This follows the gov.sg SMS Sender ID announcement on 13 Jun 2024 and aims to help recipients recognise and authenticate SMSes from SCDF.

Please be informed that Bukit Batok Fire Station will not be hosting the weekly Saturday Fire Station Open House from 30 Sep 2023 to Feb 2025. Please refer to the list of other Fire Stations that are available for visits.

1

/

3

Search Fire Code
Include in Search
Clear All

Please enter a keyword to search

4.4.1 Provision of private fire hydrant

a. General

Every part of a fire engine accessway and/ or fire engine access road shall be within an unobstructed distance of 50m from a fire hydrant. Where a public fire hydrant conforming to this requirement is not available, private fire hydrant(s) shall be provided. See Diagram 4.4.1a..

b. Use of public fire hydrant

Existing public fire hydrants along one side of a public road shall not be designated to serve developments sited on the other side of the public road, except for a road having at most two lanes, regardless of traffic direction.

c. Locations of fire hydrants

In situations where more than one private fire hydrants is required, the fire hydrants shall be located along the fire engine accessway/ fire engine access road such that every part of the fire engine accessway/ fire engine access road is within an unobstructed distance of 50m from any fire hydrant. See Diagram 4.4.1c..

d. Siting and types of fire hydrants

Siting and types of fire hydrants shall comply with the requirements stated in SS 575.

e. Ringed fire hydrant pipes

For a building that is required to have an island site fire engine accessway the fire hydrant pipe shall be a ring system. Isolation valves shall be provided on the fire hydrant ring such that on any section of ring, not more than one fire hydrant can be isolated when required for maintenance without affecting the water supply (both designed pressure and flow) to the other fire hydrants on the ring.

f. Valve locking device

A locking device shall be provided to lock the valves in open position during normal operation. Underground valves shall be kept in an open position at all times.

4.4.2 Water supply for private fire hydrant

The provision of water supply for a private fire hydrant system, where required by this Code, shall comply with the following requirements

a. Private fire hydrant at or below reduced level 125m

(1) Private fire hydrants installed at reduced level 125m and below can receive direct supply from public water mains provided the flow and pressure from the public water mains meet the fire hydrant requirements as shown in Table 4.4A, or the following requirements are complied with:

(a) the AFA of the largest compartment shall not exceed 1000m2 for PG III, IV, V & VII and not exceed 500m2 for PG VI & VIII buildings. No AFA limit for covered car park in PG II, III, IV, V & VII buildings;

(b) the nominal bore of the fire hydrant pipe and the bulk water meter shall not be less than 150mm in diameter; and

(c) the running pressure/flow at the hydraulically most unfavourable fire hydrant of the private fire hydrant system shall comply with the following: 

(i) running pressure >= 0.9 x (running pressure of the nearest public fire hydrant – pressure drop across the bulk water metre); and 

(ii) flow rate >= 0.9 x water flow of the nearest public fire hydrant or >= total flow demand (as required in Table 4.4A) of the private fire hydrant system, provided the running pressure at the most remote private fire hydrant is greater than 2 bars. 

Note: 
In calculating the frictional loss for the private fire hydrant system, the design flow rates shown in Table 4.4A shall be used. The pressure drop across bulk water metre shall not be more than 1 bar.

(2) If the requirements stipulated in Cl.4.4.2a.(1) cannot be met, a storage tank of sufficient capacity meeting the flow rate and duration as specified in Table 4.4A with the requisite pumping facilities shall be provided.

b. Private fire hydrant above reduced level 125m

(1) Where more than one private fire hydrant is located above reduced level 125m within the same plot, storage and pumping arrangements of water supply to these specified fire hydrants shall comply with the requirements stipulated in Cl.4.4.2c..

(2) The private fire hydrant can be in the form of a dry fire hydrant, if it is not the sole fire hydrant within 50m from any breeching inlet(s) feeding firefighting systems for the building(s) within the plot of land, which include:

(a) automatic fire sprinkler systems, or

(b) dry riser systems, or

(c) wet riser systems.

(3) A dry fire hydrant shall comply with all of the following requirements:

(a) A dry private fire hydrant shall be connected to a 150mm diameter dry pipe, which shall be connected at the other end to a four-way breeching inlet.

(b) This breeching inlet shall be within 18m from any fire engine accessway/fire engine access road having minimum 4m width and within 50m from any wet fire hydrant, private or public.

(c) The private dry pillar shall be painted in “yellow” and labelled “dry” on the fire hydrant pillar.

(d) A signage indicating the location of breeching inlet shall be positioned next to the dry private fire hydrant.

c. Water supply and storage requirement

Where more than one private fire hydrant is located above reduced level 125m within the same plot, storage and pumping arrangements of water supply to these specified fire hydrants shall comply with those for wet rising mains stipulated in SS 575 and  Table 4.4A Water Supply & Storage Requirements for Private Fire Hydrant.

4.4.3 Protection of fire hydrant mains in buildings

All fire hydrant mains which pass through a building shall have its full length within the building protected with fire resistance construction complying with Cl.3.8.7b. of at least the same fire resistance as the element of structure, provided all of the following requirements are complied with:

a. The fire hydrant mains shall be located in common circulation areas, such as car parking spaces (except spaces used for mechanical car parking) and driveways, i.e. they shall not pass through private or confined spaces.

b.  No services other than sprinkler pipe(s) shall be located above or crossing over the fire hydrant mains. Where services need to cross-over the hydrant mains, the following conditions shall be complied with:

(1) the services shall only cross over the fire hydrants mains perpendicularly;

(2) the tensile stress of the supports for the services shall not exceed 10N/mm2; and

(3) the services shall be adequately protected by the building’s sprinkler system.

c. The fire hydrant mains shall be located away from explosion risk areas.

d. The protective enclosure to the fire hydrant mains shall be labelled with the words “FIRE HYDRANT MAIN” of minimum 50mm height at suitable intervals.

Cul-de-sac turning facility

Cul-de-sac turning facility

U-turn radii

U-turn radii

Dimensions of Turning Facilities for Firefighting Appliances

Dimensions of Turning Facilities for Firefighting Appliances
ParametersBuilding Habitable Height
≤ 10m*> 10 & ≤ 50m#> 50m#
R14.0m6.5m7.5m
R28.0m10.5m12.0m
R38.5m12.0m14.8m
L14.0m4.0m4.5m
L211.0m16.0m21.0m
L315.0m28.1m33.5m
L48.0m10.5m12.0m
Note:
*   -   These dimensions are applicable to all PG except PG VI and VIII buildings, unless otherwise stated in Cl.4.2.2a.(1). For PG VI and VIII buildings ≤ 10m, it shall refer to (> 10 & ≤ 50) requirements, as indicated in Table 4.2C
#   -   Not applicable to PG I buildings. For PG I buildings, it shall refer to (≤ 10m) requirements

Diagram 4.2.2e.: Turning facilities for firefighting appliances

Building Structure over Fire Engine Access Road

Diagram 4.2.2f.: Building structure over fire engine accessway/ fire engine access road

Diagram 4.2.2i.(2): Marking of fire engine accessway/ fire engine access road

 

 

Diagram 4.2.2i.(2): Marking of fire engine accessway/ fire engine access road

Diagram 4.2.2i.(3): Pictogram signage for fire engine accessway/ fire engine access road

Diagram 4.2.2i.(3): Pictogram signage for fire engine accessway/ fire engine access road

Diagram 4.2.2j.(1) - 1 & 2

Diagram 4.2.2j.(1) - 1: CPL 34 firefighting appliance - Wheels & jacks layout

Diagram 4.2.2j.(1) - 2: AL 56 & CPL 60 firefighting appliances - Wheels & jacks layout

Diagram 4.2.2j.(3) - 3: HLA 90 firefighting appliance - Wheels & jacks layout

Diagram 4.2.2j.(3) - 3: HLA 90 firefighting appliance - Wheels & jacks layout

Diagram 4.2.2l. Bi-directional fire engine accessway/fire engine access road

Diagram 4.4.1a.: Provision of private fire hydrant

Diagram 4.4.1a.: Provision of private fire hydrant

Provision of Private Hydrant

Diagram 4.4.1c.: Siting of private fire hydrant

TABLE 4.2A: FIRE ENGINE ACCESSWAY/FIRE ENGINE ACCESS ROAD FOR PG II BUILDINGS

TABLE 4.2A: FIRE ENGINE ACCESSWAY/FIRE ENGINE ACCESS ROAD FOR PG II BUILDINGS
Details Habitable Height (m)
≤ 10 > 10 & ≤ 50 > 50
Width of fire engine access road > 4m
Width of fire engine accessway* Not required > 6m > 7m
Length of fire engine accessway* - > 15m > 15m
Type of firefighting appliance Pump ladder CPL 34 & AL 56 AL 56, CPL 60 & HLA 90
Loading capacity of fire engine road# > 24 tonnes > 30 tonnes > 50 tonnes
Loading capacity of fire engine accessway# - > 30 tonnes > 50 tonnes
Axle/ Jack loading - See Table 4.2D & Table 4.2E
Turning facility See Diagram 4.2.2e.
U-turn radii

Note:

# - The appended figures for loading capacity of fire engine accessway/ fire engine access road are characteristic values

* - A fire engine accessway of at least ¼ length of perimeter (minimum 15m), whichever is greater, shall be provided to access at least one facade of each block

 

TABLE 4.2B: FIRE ENGINE ACCESSWAY/FIRE ENGINE ACCESS ROAD FOR PG III, IV, V & VII BUILDINGS

TABLE 4.2B: FIRE ENGINE ACCESSWAY/FIRE ENGINE ACCESS ROAD FOR PG III, IV, V & VII BUILDINGS
Details Habitable Height (m)
≤ 10 > 10 & ≤ 50 > 50
Width of fire engine access road > 4m
Width of fire engine accessway Not required > 6m > 7m
Length of fire engine accessway - See Table 4.2.2a.(6)
Type of firefighting appliance Pump ladder CPL 34 & AL 56 AL 56, CPL 60 & HLA 90
Loading capacity of fire engine access road# > 24 tonnes > 30 tonnes > 50 tonnes
Loading capacity of fire engine accessway# - > 30 tonnes > 50 tonnes
Axle/ Jack loading - See Table 4.2D &  Table 4.2E
Turning facility See Diagram 4.2.2e.
U-turn radii

Note:

# = The appended figures for loading capacity of fire engine accessway/ fire engine access road are characteristic values

 

TABLE 4.2C: FIRE ENGINE ACCESSWAY/FIRE ENGINE ACCESS ROAD FOR PG VI & VIII BUILDINGS

TABLE 4.2C: FIRE ENGINE ACCESSWAY/FIRE ENGINE ACCESS ROAD FOR PG VI & VIII BUILDINGS
Details Habitable Height (m)
≤ 10 > 10 & ≤ 50 > 50
Width of fire engine access road > 4m
Width of fire engine accessway > 6m > 6m > 7m
Length of fire engine accessway See Table 4.2.2a.(7)
Type of firefighting appliance CPL 34 & AL 56   CPL 34 & AL 56   AL 56, CPL 60 & HLA 90
Loading capacity of fire engine access road# >  30 tonnes > 30 tonnes > 50 tonnes
Loading capacity of fire engine accessway# > 30 tonnes > 30 tonnes > 50 tonnes
Axle/ Jack loading See Table 4.2D &  Table 4.2E
Turning facility

See Diagram 4.2.2e.

under (>10 & ≤50)

See Diagram 4.2.2e.
U-turn radii

Note:

# = The appended figures for loading capacity of fire engine accessway/ fire engine access road are characteristic values                   

 

TABLE 4.2D: AXLE LOADING OF FIREFIGHTING APPLIANCES

TABLE 4.2D: AXLE LOADING OF FIREFIGHTING APPLIANCES
Axle No. (from font)Type of firefighting appliances
Pump LadderCPL 34AL 56CPL 60HLA 90
Loading Wt. (kg)No of wheelsLoading Wt. (kg)No of wheelsLoading Wt. (kg)No of wheelsLoading Wt. (kg)No of wheelsLoading Wt. (kg)No of wheels
Axle 110000275002900029000290002
Axle 21400021050021050049900490002
Axle 3--10500410500499004105004
Axle 4------82002105004
Axle 5--------100002
Axle 6----------

Note:

The appended figures for axle loading are characteristic values

 

TABLE 4.2E: JACK LOADING OF FIREFIGHTING APPLIANCES

TABLE 4.2E: JACK LOADING OF FIREFIGHTING APPLIANCES
Type of Fire Appliance CPL 34 AL 56 CPL 60 HLA 90
Jack load contact area 5625 cm2 5625 cm2 7125 cm2 7125 cm2
Maximum pressure per Jack (4 jacks per vehicle) 37 N/cm2 37 N/cm2 37 N/cm2 50 N/cm2

Note:

The appended figures for jack loading are characteristic values

 

TABLE 4.4A: WATER SUPPLY & STORAGE REQUIREMENTS FOR PRIVATE FIRE HYDRANT

TABLE 4.4A: WATER SUPPLY & STORAGE REQUIREMENTS FOR PRIVATE FIRE HYDRANT
Purpose Group Accessible Floor Area* Minimum Flow Rate Minimum Running Pressure Minimum Water supply and Storage Duration
(m2) (L/s) (bar) (mins)
PG I & II - 27 2 45
Covered car park not within PG VI & VIII buildings + NL 38 2  45
PG III, IV, V & VII ≤ 1000 38 2 45
> 1000 & ≤ 5000 57
> 5000 & ≤ 10000 76
> 10000 95
PG VI & VIII ≤ 500 38 2 90
> 500 & ≤ 5000 57
> 5000 & ≤ 10000 76
> 10000 & ≤ 15000 95
> 15000 & ≤ 20000 114
> 20000 133

 

Note: 

NL -    No limit

*   -    Based on the Accessible Floor Area (AFA) of the largest compartment in the building

+   -    This requirement is only applicable to car parking facilities within PG II, III, IV, V & VII buildings, either as a standalone multi-storey car park or within a building (above ground or below ground). The hydrant requirements for the remaining parts of the buildings shall comply with Cl.4.4.2a., Cl.4.4.2b. and Cl.4.4.2c.

 


Updated 2 Sep 2024